16:43 2024.01.11

Bosch will launch a hydrogen combustion engine for trucks in 2024

German company Bosch has announced plans to launch the first hydrogen combustion engine for trucks in 2024 to complement its existing fuel cell and battery electric products. Hydrogen engines are less efficient than fuel cells, and cars using hydrogen engines require more hydrogen to travel the same distance. But hydrogen-powered internal combustion engines are cheaper and easier to maintain than fuel cells, which are more prone to fouling with dirt and dust, and require very high-purity hydrogen to operate, proponents say. Bosch says on its website that hydrogen combustion engines represent another option for future powertrains. Especially under challenging environmental conditions, hydrogen internal combustion engines are characterized by robust performance. In other words, hydrogen combustion engines may be more suitable for off-road heavy vehicles, and Bosch's website shows that excavators and agricultural tractors in the construction industry may be the solution for this technology. Analyst Jamie Fox believes that off-road vehicles such as tractors and mine vehicles may be better suited to using hydrogen combustion engines than trucks. Editor/Xu Shengpeng

11:14 2023.08.09

CREC small diameter hard rock excavation machine Longrun is offline

On August 8, 2023, the world water diversion project's minimum diameter single shield TBM "Longrun" (CREC 1325), jointly developed by CREC Tunnel Bureau and CREC Equipment, was successfully launched in Deyang, Sichuan. The equipment will be applied to the Qimashan Tunnel project of the Dali construction section of the Dianzhong Water Diversion Phase II supporting project. The second phase of the Dianzhong Water Diversion Project is to divert high-quality water from the relatively abundant Jinsha River mainstream in the snowy plateau to the central Yunnan region, alleviate the contradiction between production and living water shortage in the central Yunnan region, improve the ecological and water environment conditions of rivers and lakes in the region, and have significant significance for the sustainable development of the social and economic development of Yunnan Province. The "Longrun" single shield TBM has an excavation diameter of 4.6 meters and a total length of 480 meters. It is equipped with multiple innovative technologies and has characteristics such as keen flexibility and continuous excavation, providing strong guarantees for project safety, high-quality, and efficient excavation. Editor/Ma Xue

11:33 2023.08.08

XCMG Group and Baosteel Group Sign a Strategic Cooperation Agreement

On August 5, 2023, XCMG Group and Baosteel Group held a strategic cooperation agreement signing ceremony, marking a new stage of comprehensive and in-depth strategic partnership between the two sides. At the ceremony, the two sides conducted in-depth exchanges on establishing close strategic cooperation to concentrate advantageous resources in the future, and will work together to develop high-end green mining equipment, promote the construction of national green mines and smart mines, and ensure the safety of national mining resources. Both sides hope to take this signing as an opportunity to collaborate and innovate in industries such as green intelligent equipment, modern manufacturing services, hydrogen energy in the field of construction machinery, and cutting-edge technology research and development applications, deepen cooperation, and work together for win-win results. Editor/Ma Xue

10:58 2023.06.26

XCMG signs a strategic contract with a Portuguese energy giant

Recently, XCMG signed a memorandum of cooperation with Portuguese construction and new energy giant Mativ Group, agreeing to deepen cooperation on the widespread application of sanitation and new energy equipment in Portugal. Chinese Ambassador to Portugal, Zhao Bentang, attended and witnessed the signing of a memorandum of cooperation between Liu Jiansen, Vice President of XCMG Machinery and General Manager of XCMG Import and Export, and Martins, Chairman of Martins Company. The successful cooperation between XCMG and Mativo this time is another gratifying achievement of the joint construction of the the Belt and Road between China and Portugal, and has far-reaching significance in promoting the cooperation between Chinese and Portuguese enterprises and promoting the development of economic and trade relations between the two countries. Editor/Ma Xue

09:57 2023.06.26

Sany hybrid energy-saving SET240S electric wheel mining vehicle offline

Recently, the Sany hybrid energy-saving SET240S electric wheel mining car was officially taken offline for acceptance at the Sany Heavy Duty Shenyang Industrial Park. SET240S electric wheel tramcar is the first three engine hybrid off-road mining Dump truck in the industry. Compared with traditional electric wheel tramcars, it can save energy by more than 15%, reduce maintenance costs by more than 50%, and create greater value for customers. The SET240S electric wheel mining vehicle, which took one year from investment in research and development efforts to complete the production line, is currently a major model independently developed and produced by Sany Heavy Industries, and can meet the usage needs of various working conditions in open-pit mines. Editor/Ma Xue

15:26 2023.05.22

Liugong Zhongya Machinery Co., Ltd. opens

On May 20, 2023, Liugong Machinery Central Asia Co., Ltd. held a grand opening ceremony in Tashkent, the capital of Uzbekistan. On the morning of the same day, LiuGong Central Asia held a handover ceremony to a large customer of the 970E. In the afternoon, Liugong Central Asia Distributor Conference in the Russian-speaking region was successfully held. On behalf of the company, Xu Xiang, deputy general manager of Liugong Central Asia, signed the dealer target agreement with the dealers to jointly help achieve the annual goals. With the construction of the China-Kyrgyzstan-Uzbekistan railway, Uzbekistan will become a new logistics center, and the extension of the railway to Iran and Russia will bring new opportunities. Edit/Ma Xue

16:56 2023.05.16

Domestic large-scale impact turbine runner off the production line

On May 16, 2023, the first domestic 150-megawatt-class large-scale Pelton turbine runner was successfully rolled off the production line in Deyang, Sichuan, marking a major breakthrough in the core components of my country's Pelton turbine. The runner that rolled off the production line this time weighs about 20 tons and has a maximum diameter of about 4 meters. It will be used in the Tianwanhe Jinwo Hydropower Station in Ya'an City, Sichuan Province, and is expected to be put into operation in early June. It is understood that the impact turbine uses a special water guide mechanism to rush the water from the pressure pipe to the runner, causing it to rotate and drive the generator rotor to generate electricity. It is mostly used in hydropower stations with high water head and small flow. Edit/Ma Xue

11:02 2023.04.27

XCMG mobile crushing station exported to Central Asia in batches

Recently, XCMG Mining Machinery's international market development has delivered another good news. The XPE0912 mobile crushing station has successfully entered the Central Asian market, once breaking the competition pattern of local foreign brand monopoly. Customers in Central Asia have a special liking for XCMG mining machinery products. Customers in this country have successively purchased 80-90 ton excavators and 80-100 ton mine trucks in batches, and spoke highly of XCMG equipment: high operating efficiency, strong performance, and fuel economy Good reliability, sufficient and timely supply of spare parts, and the 24-hour on-site service of service personnel also allow us to recognize XCMG’s quality. Edit/Ma Xue

17:12 2023.04.21

CREG cantilever roadheader CTR450 rolled off the production line

On April 19, 2023, the ultra-large longitudinal axis cantilever roadheader CTR450 independently developed by China Railway Equipment Group Equipment Co., Ltd. rolled off the production line in Xinxiang. This equipment will soon be used in the construction of the Daegu Municipal Underpass Tunnel Project in South Korea. This is also the first time that a domestic cantilever roadheader has been exported to South Korea. The CTR450 cantilever roadheader rolled off the production line this time is 21 meters long, 4.1 meters wide, and 5.1 meters high. Its cutting power, single positioning cutting range, and weight of the whole machine have all set the world record for cantilever roadheaders. This product is innovatively designed with a telescopic cutting arm with a maximum elongation of 1.2 meters, which is the first in the world to achieve a 20% increase in the cutting area. Edit/Ma Xue

10:58 2023.04.21

CRCC Inclined Shaft Tunneling Machine Rolled Off the Production Line

On April 20, 2023, a tunnel boring machine that can achieve 50° ultra-large slope climbing, 6.53 meters and 8 meters variable diameter excavation rolled off the production line in Changsha First Industrial Park of China Railway Construction Heavy Industry. The variable-diameter inclined shaft rock tunnel boring machine marks another new breakthrough in my country's underground construction site equipment, filling the gap in the field of full-section mechanized construction equipment for super-large slope two-stage inclined shafts in China, and further enriching the global roadheader product spectrum. This equipment is named Tianyue, with a total length of 87 meters and a total weight of about 900 tons. It was jointly built by China Railway Construction Heavy Industry, State Grid Xinyuan Hunan Pingjiang Pumped Storage Company, and China Hydropower Eighth Bureau. It will participate in key energy projects in Hunan Province— —Construction of diversion inclined shaft project of State Grid Xinyuan Hunan Pingjiang Pumped Storage Power Station. Edit/Ma Xue

11:14 2023.03.01

Liugong's overseas shipments of large excavators increased by 500% year-on-year

Since February 2023, Liugong has made continuous breakthroughs in the overseas large excavator market, and its shipments have increased by 500% year-on-year! Recently, Indonesia's first rock arm excavator - Liugong 970E rock arm excavator successfully entered the customer's mine project. The customer has successively purchased more than 100 sets of Liugong equipment in the past year, including a complete set of mining equipment such as loaders, excavators, road rollers, graders, bulldozers, and mining wide-body vehicles. The 970E rock arm excavator weighs 90 tons and is mainly used for crushing surface rocks in mines. Compared with bulldozers, it can efficiently break harder rock layers when stripping the surface rock and soil. After a period of trial, the customer found that the working efficiency of the 970E rock boom excavator was 32% higher than that of other brands of 500-horsepower bulldozers, while the fuel consumption was 25% lower. At present, the customer has placed another order for two 970E rock boom excavators. Edit/Ma Xue

15:22 2023.02.23

Shantou Bay Tunnel Ludao No. shield machine off the production line

On February 21, 2023, a Tunjima shield machine with the pattern of a brave tiger shark painted on the cutter head was completed and rolled off the production line smoothly. This is a domestically produced large-diameter mud-water balance shield machine jointly built by China Railway 14th Bureau and China Railway Construction Heavy Industry Group. It will be used in the construction of the Shantou Bay Tunnel on the Shantou Guang'ao Port Area Railway, and will soon start a journey through the sea. Shantou Guangao Port Railway is located in Shantou City, Guangdong Province. It starts from Shantou Station of Guangmeishan Railway in the north and ends at Guangao Port in the south. The Guangzhou-Macao Port Area Railway Line 1 has a total length of 17.116 kilometers, including a tunnel, two bridges and other construction content. The Shantou Bay Tunnel is a key and difficult control project of the project, with a total length of 9965 meters, of which the shield section is 2990 meters long. The segment has an outer diameter of 12.9 meters and an inner diameter of 11.8 meters. The excavation diameter of the cutter head of the Tunnel Tunneling Machine on the Gudao Island is 13.42 meters, the total length of the shield machine is 126 meters, the weight of the whole machine is about 3,300 tons, and the total installed power is 9,300 kilowatts. The shield cutter head has the functions of normal pressure tool change, hob exchange, hob wear detection, speed detection, and temperature detection. In order to deal with the problem of low construction efficiency in hard rock formations, the distance between cutterheads and cutters of the shield machine has been further reduced, and pressure hobs have been added to help improve rock breaking efficiency. The cutter head is equipped with a total of 185 cutters, of which 89 can be replaced under normal pressure, realizing full coverage of the cutter head's excavation trajectory. Editor / Zhao E

08:54 2023.02.06

XCMG won the Medal of Honor of China-Pakistan Friendship

Recently, the China-Brazil Friendship Meritorious Enterprise Awards Ceremony was grandly held in the Brazilian Chamber of Deputies. The organizer of the event specially awarded the 20th anniversary commemorative version of the Medal of Honor. This time, XCMG, XCMG Made in Brazil, and XCMG Brazil Bank won the honorary title of Eternal Guardian of China-Brazil Integration . Editor/He Yuting

15:15 2023.02.02

XCMG tower cranes are shipped to the world in batches

Recently, at the two intelligent manufacturing bases of XCMG tower cranes in Xuzhou and Chongqing, a batch dispatch ceremony of 100 million units of products with an order of 100 million yuan was grandly held, and went to the first-line construction around the world. Three major product segments of construction elevators. Edit/Ma Xue

15:13 2023.02.02

XCMG's large mining dump trucks are sent to Africa in batches

On January 30, 2023, XCMG's large-scale mining dump trucks will be dispatched to the African market in batches. The XDE130 double-axle rigid mining car launched this time is a new generation of 120-ton class classic product of XCMG. It has successively conquered iron ore, copper and non-ferrous metal mines in Africa, Southeast Asia and Australia. Edit/Ma Xue

09:16 2023.02.01

80 star products of Liugong Jianghan went to the market

On the morning of January 30, Liugong Jianghan’s 2023 New Year’s Opening Ceremony officially began. With a command, vehicles carrying 80 sets of equipment set off in line to Beijing, Shanghai, Hubei, Guangdong, Jiangxi and other places. Editor/He Yuting

14:57 2023.01.31

XCMG's complete sets of port machinery exported overseas in batches

Recently, in the high-end intelligent manufacturing base of XCMG port machinery, complete sets of port machinery have been sent to the world. The main highlights of this launch equipment are mass production, customized models, and multi-function. The products cover reach stackers, stackers, counterbalanced forklifts, Telescopic forklift trucks, etc., will show their talents in the construction of major overseas projects such as global ports, railway mines, and logistics bases. Editor/He Yuting

14:40 2023.01.31

Hundreds of XCMG tower cranes are shipped to the world in batches

Recently, at XCMG's two intelligent manufacturing bases of tower cranes in Xuzhou and Chongqing, a batch launch ceremony of 100 million units of products with an order of 100 million yuan was grandly held. The products launched this time include three major product segments: flat head tower cranes, luffing jib tower cranes and construction elevators. , to achieve a good start for all products. Editor/He Yuting

18:18 2022.12.27

XCMG XGC400-I Crawler Crane Competes for Xiong'an Municipal Engineering

Xiong'an, China, has a millennium mission. In December 2022, XCMG XGC400-I crawler crane will carry out normal operation under 84m+84m super large, super high and extreme super lift tower boom conditions at the site of Xiong'an Waste Comprehensive Treatment Facility Phase I Project. At the site, XCMG XGC400-I stands beside the "Lotus Tower", narrowing the narrow working face and holding a hundred meter arm steadily. "With this car, the operation space and height can be well balanced. The operation range of more than 160 meters and 400 tons of XCMG is roughly equivalent to a standard football field," said the operator of China Railway Construction Corporation. Editor/Xing Wentao

17:16 2022.12.05

50 SANY truck cranes completed batch delivery

On November 29, 2022, a total of 50 Sany truck cranes of 25 tons, 50 tons and 80 tons will be officially delivered to Shandong Hongli Crane Engineering Co., Ltd., which marks a solid step towards high-quality development of Shandong Hongli Crane. Shandong Hongli Crane Co., Ltd. is one of the top 100 hoisting enterprises in China. It has more than 100 hoisting equipment and transport vehicles. Over the past ten years, he has accumulated rich construction experience, participated in more than 100 projects such as fan installation, petrochemical industry, transportation construction, etc., and his achievements are not only all over China, but also involved in Southeast Asia and European markets. Editor/Xing Wentao

15:33 2022.11.09

Yilong-3 UAV debuted at Zhuhai Airshow for the first time

On November 8, 2022, the Pterosaure-3 independently developed by the aviation industry made its first public appearance at the 14th China Airshow. The family of Pterosaur UAVs added new talent and made a major new breakthrough in pedigree development. Editor/Zhao E

15:46 2022.10.14

Goldwind Technology GWH252-13.6MW large capacity unit is offline in Fujian

On October 13, 2022, Goldwind Technology GWH252-13.6MW units were successfully launched in Fujian Three Gorges Offshore Wind Power International Industrial Park, Fuqing City, Fujian Province. GWH252-13.6MW, independently developed by Goldwind Technology, is the wind turbine with the largest impeller diameter, the highest wind energy conversion efficiency of units with the same capacity, and the largest single unit capacity in the Asia Pacific region. Edit/Ma Xue

09:11 2022.10.14

Jinfeng Technology's 13.6MW offshore wind turbine is offline

On October 13, 2022, the 13.6 MW offshore wind turbine independently developed by China was launched in Fujian Three Gorges Offshore Wind Power International Industrial Park. The unit is the wind turbine with the largest impeller diameter in the world and the largest single unit capacity in the Asia Pacific region. The single unit capacity of 13.6 MW offshore wind turbine unit to be launched this time, the impeller diameter is 252 meters, and the impeller sweeping area is about 50000 square meters. Edit/Ma Xue

15:15 2022.10.13

Heavy truck motorized press the speed button

Recently, Sany Heavy truck announced in its new product online release conference that it has officially entered the era of electrification 2.0. It is understood that the electrification of heavy trucks has become an important direction of carbon reduction in the automotive field in recent years, and the electric heavy trucks have occupied the main part of the increment of the heavy truck market. In the view of the industry, with the continuous improvement of technical routes and infrastructure, heavy truck electrification process will be further accelerated. Editor/Xu Shengpeng

09:03 2022.10.10

TBM of Plateau Pearl of Sinohydro Bureau 14 started

Following the successful launch of the "Hongyi" TBM, Sinohydro Bureau 14 Co., Ltd. launched another important tool of the country in the same month - the large-diameter TBM "Plateau Pearl" through the plateau cold railway tunnel. The intelligent and intelligent TBM equipment system has reached the highest level of tunnel equipment technology in the world. Edit/Ma Xue

15:39 2022.09.29

China's first high-power hydrogen energy shunting locomotive in operation

Recently, the domestic first powerful hydrogen power shunting locomotive "hydrogen dragon no.1" was held in new countries: railway starting test run, marks China's marketization of overloaded railway power hydrogen energy power equipment using made significant breakthrough, "hydrogen dragon number one" is the first in the field of rail transit oriented high-power fuel cell system, rated power 400 kw, It is the vehicle hydrogen system with the largest hydrogen storage capacity in China. Editor/Xu Shengpeng

09:49 2022.09.27

Sany signed an EPC project for an intelligent construction industrial park

On September 25, Runsheng Group and Sany Heavy Industry signed the contract for the first EPC project of intelligent construction industrial park in Changsha Industrial Park. The EPC project of Qilu Intelligent Construction Industrial Park is the first one undertaken by Sany Group including design-construction-procurement The first phase of the project covers an area of about 240 mu. It mainly builds the regional headquarters economic center, Sany ALC intelligent construction workshop, and Sany SPCS intelligent construction workshop. Editor/He Yuting

15:26 2022.09.26

LiuGong and CATL signed a ten-year strategic cooperation agreement

Recently, Guangxi Liugong Machinery Co., Ltd. and Ningde Times New Energy Technology Co., Ltd. signed a ten-year strategic cooperation framework agreement. Liugong became the first partner in the construction machinery industry to sign a ten-year strategic cooperation agreement with Ningde Times. Editor/He Yuting

15:44 2022.09.22

China's 600 km/h maglev transport system debuts in Europe

China's 600 km/h high-speed maglev transportation system with completely independent intellectual property rights was unveiled at the International Rail Transit Technology Exhibition in Berlin, Germany on Tuesday (20th). The system will roll off the production line in Qingdao, China in 2021. It is the fastest ground transportation currently achievable, and it is also the world's first high-speed maglev transportation system with a design speed of 600 kilometers per hour. Editor / Xu Shengpeng

09:01 2022.09.21

Chongqing Metro Shancheng Striving for the First Shield Machine Offline

On September 20, 2022, the "Shancheng Shengxian" (China Railway No. 1221) earth pressure balance shield machine developed by China Railway Equipment, a subsidiary of China Railway Industry, was successfully rolled off the line at Deyang Base. It is applied to the construction of the 10th section of Chongqing Metro Line 27, which is responsible for the construction of the China Construction Third Engineering Bureau. Editor/Ma Xue


Retrieve password

Get verification code